Signal Processing
I.M.D.P.
Monitors
Timing
Calibration
Viewfinders
be83-f_front-640x125be83-f_front-640x125

BrightEye 83-F HDMI to Optical and Electrical 3G / HD / SD SDI Converter

Convert HDMI to 3G/HD/SD SDI with the BrightEye 83-F. The output format follows the input, faithfully preserving the input’s resolution and frame rate. Convenient for broadcast video cameras and other sources with an HDMI output. BrightEye 83-F presents both electrical and optical serial digital outputs.

The optical output can drive single mode fiber to a distance of 20 kilometers. With an optical launch power attenuator, multi-mode fiber can also be used.

BrightEye 83-F is for use with standard definition video signals and 3 Gb/s and 1.5 Gb/s high definition signals.

Signal monitoring and control is provided through the included BrightEye Mac and BrightEye PC software.

In compliance with the licensing restrictions on HDCP encrypted material, BrightEye 83-F cannot convert encrypted signals to SDI form. For support of HDCP encrypted content check out the BrightEye 83-H.

Product Documents

Datasheet

Manual

Contact Sales

Description

  • HDMI to Optical and Electrical Converter
  • Use with Cameras and Other Sources that have an HDMI Output
  • Passes Embedded Audio
Input
  • Number One
  • Type HDMI 1.3
  • Format Supports HDMI signals which map to the video standards listed below
SDI Standards Supported
  • 1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz
  • 720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz
  • 1080p (SMPTE 274M -9,10,11) 23.98, 24, 25 Hz
  • 1080sF (RP211 -14,15,16) 23.98, 24, 25 Hz
  • 1080p (SMPTE 424M, 425M), 50, 59.94, 60, Level A
  • 525i, 625i (SMPTE 259M)
Serial Digital Output
  • Number Two, BNC
  • Signal Type Follows input
  • Impedance 75 Ω
  • Return Loss >15 dB to 1.485 GHz >10 dB to 2.97 GHz
  • Output DC None (AC coupled)
Optical Output (BE83-F Only)
  • Number One, LC/UPC
  • Type Follows input
  • Wavelength 1310 nm (non-CWDM)
  • Wavelengths 170 nm –1610 nm at 20 nm CWDM spacing available. Call factory for price and specify part number BE83-F-SP.
  • Power -7 dBm
  • Max Cable Length 20 km (For greater distances, or higher power and larger loss budgets, please contact the factory)
  • Fiber Type Single Mode
  • Multi-mode compatible with attenuation at transmit end
General Specifications
  • Size 5.625” W x 0.8” H x 5.5” D (143 mm x 20 mm x 140 mm) including connectors
  • Power 12 volts, 5 watts (100-230 VAC modular power supply)
  • Temperature Range 0 to 40° C ambient (all specs met)
  • Relative Humidity 0 to 95° non-condensing

Product Documents

Datasheet

Manual

Related products you might be interested in

BrightEye 41 Video/AES/Tri-Level Sync Distribution AmplifierBrightEye 41 is a distribution amplifier that accepts analog video, AES digital audio, or Tri-Level Sync signal. It can also be used with SMPTE 310M, Dolby E and AC-3 signals. It provides unity gain fanout over a frequency range of DC to 10 MHz. It can handle composite and component analog video, coaxial AES digital audio, or a High Definition Tri-Level Sync signal. When using a digital to analog video converter and multiple outputs are needed, BrightEye 41 can be used to distribute and provide those additional output signals. BrightEye 41 works well with video converters BrightEye 10 and BrightEye 16. BrightEye 41 is also useful in conjunction with any of the BrightEye SPG/TSGs, for distributing Tri-Level Sync, AES and composite signals.
BrightEye Control SoftwareBrightEye Control allows you to access all of the controls in your BrightEye devices. Adjust video levels, output timing and audio mixing and more. No DIP switches or button hold-downs are needed. Firmware updates, with feature enhancements and bug fixes, are provided for the lifetime of your BrightEye device. Install them with ease from your Mac or PC using BrightEye Control. The BrightEye Control software is included with each BrightEye at no charge. Version History 3.2.2 Fixes window resizing issue on Windows when using Hi-DPI displays. Only released for Windows (32-bit and 64-bit). 3.2.1 Hi-DPI Support on Windows. Control fixes and performance improvements. First Windows 64-bit build. Compatible with Windows 7, 8, 10, and 11 First Apple Silicon native release. Compatible with macOS 10.15+ 3.1.0 Built for Intel x86 64-bit. Compatible with Apple Silicon Macs via emulation. Compatible with macOS 10.15+ Only released for macOS. 3.0.2 Further improvements to connection reliability, especially with older BrightEye devices. Fixes issue with recalling saved settings on units with memory registers. Previously, recalling the saved settings could trigger memory register recalls. You can now set string controls to “”, which allows you to properly remove a feature license. Fixes several crashes related to connecting and disconnecting BrightEye devices. Other small fixes and enhancements. 3.0.1 Improved Connection Reliability Fixed problem where updating BrightEye firmware was sometimes slow. 3.0.0 Replaces BrightEye Mac and BrightEye PC. Improved user interface to make controlling BrightEye devices easier than ever. BrightEye devices now show up in the interface automatically, no need to manually refresh. Improved performance when controlling many BrightEye devices. Support for HiDPI and “Retina” displays. Fixed issues with firmware updates on newer Windows PC’s. Many other bug fixes and enhancements.
BrightEye 90-A HD Up/Down Cross Converter and ARC with Analog AudioBrightEye 90-A is a versatile up/down/cross converter or aspect ratio converter for use with analog and digital video signals. Simply set the BrightEye 90-A to output your facility’s preferred HD or SD standard. The BrightEye 90-A will accommodate whatever input you connect – analog composite, SD SDI or HD SDI. After setting the output standard, BrightEye 90-A automatically converts the selected input to the correct standard for your facility. BrightEye 90-A will upconvert, downconvert, cross convert, or act as an ARC, as needed. The built-in Frame Synchronizer allows you to feed asynchronous signals to the BrightEye 90-A. An external reference input allows genlock to a house reference. All vertical interval data and closed captioning is faithfully passed. Upconverting to High Definition Feed the analog composite or SD SDI output of a camera to a BrightEye 90-A and upconvert to HD. You can take the HD signal from the BrightEye 90-A into a switcher or projection system. Upconverting existing SD equipment lets you leverage the equipment you already have and operate in the HD domain. While some cameras may have firewire out, using the video output and upconverting before distribution is preferable since longer cable runs can be achieved and quality is superior. Additionally, the BrightEye 90-A’s reference input allows you to time the upconverted video output for use with a production switcher. Downconverting to Standard Definition BrightEye 90-A will downconvert any type of HD signal and provides both an SD SDI and an analog composite output suitable for broadcast or monitoring. Cross Conversion It’s easy to convert between various HD standards, whether 720p or 1080i. Simply select the output standard you need and connect the input, that’s all there is to it. Aspect Ratio Conversion For converting between SD 4:3 and HD 16:9, BrightEye 90-A has you covered. Just select the output standard you need and connect the input. Audio Processing Made Simple BrightEye 90-A handles both embedded audio and eight channels of analog audio. Sixteen channels of embedded audio are supported in BrightEye 90-A. If the incoming video has embedded audio, the audio will be safely bypassed around the video processing and lipsync will be preserved. Audio mixing is available for two of the four embedded groups of audio. The analog audio I/O ports can be configured for eight channels of incoming audio or for eight channels of audio output. The audio mixer can be used for analog audio as well. Mixer controls are accessed through the BrightEye Control Software. Monitoring for Video and Audio Audio monitoring is easy with BrightEye 90-A’s convenient 3.5mm mini jack. Select the audio channels you want to monitor from the front panel and plug in a headset. The HDMI connector on the rear of the unit provides a future proof monitoring interface. Plug it into most LCD monitors for confidence monitoring of your feed. Front Panel and Software Control Input selection, gain control, and test pattern controls are provided through the front panel interface. Audio presence LEDs indicate which channels are detected. Controls for crop, letterbox and pillarbox are accessed from the front panel or BrightEye Mac or PC software. Video and audio levels and the audio mixer can be adjusted through BrightEye Mac or PC software.
BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse GeneratorBrightEye 57 is a genlockable sync generator and test signal generator that can be used as either a slave or master reference generator. It can lock to house reference or it can lock to its own internal precision standard. BrightEye 57 is well suited for remote trucks, post, helicopters and fly packs. 1.5 Gb/s HD, 3 Gb/s HD or SD SDI test signals or black with embedder is output on the SDI BNCs. Composite, Tri-Level Sync and AES digital audio outputs are also provided. There are three user Programmable Outputs that are selectable between AES, LTC, Word clock or 6 Hz Pulse. Analog audio and AES outputs provide tone or silence. Color Black, Bars, Crosshatch, Multi-burst, and SDI Checkfield (Pathogenic) are just some of the signals simultaneously available on the SDI and analog composite outputs. The Cyclops feature adds a motion element to the selected video test signal. An ID slate with user programmable text can overlay the test pattern. The internal Time Code Generator feeds DVITC on the SDI outputs and VITC on the composite outputs, Time Code can also be selected in LTC form on the programmable Aux outputs. In addition to the standard suite of test patterns, users can create custom test patterns on a computer. Using BrightEye Pattern Generator software, simply transfer test patterns to the included Secure Digital flash memory card and then insert the memory card into the front of the BrightEye 57. Test patterns can include motion. File formats supported: .tga, .wav, .mp3, .wma. Many controls can be adjusted through the intuitive front panel. The BrightEye Control app provides a complete user interface for all adjustments and controls. For facilities and manufacturers using 3 Gb/s video, BrightEye units can be combined to form a complete 3G signal chain. The BrightEye 57 test signal generator’s 3G output can be distributed through the BrightEye 43 3G distribution amplifier or the BrightEye 46 and BrightEye 48 E/O 3G fiber optical transmitter/receiver set.

Looking for something else?

Signal Processing
I.M.D.P.
Monitors
Timing
Calibration
Viewfinders

Contact Sales