• Skip to main content
  • Why Plura
    • Our Team
    • Videos
    • 15th Anniv.
    • Our History
    • Case Studies
    • Distributors
  • Products
    • At a Glance
    • X Processing
    • I.M.D.P.
    • Monitors
    • Timing
    • Calibration
    • Viewfinders
  • Support +
    • Downloads
    • Virtual Mtg.
    • RMA Request
  • News + Events
    • News
    • Events
  • Contact
  • Why Plura
    • Our Team
    • Videos
    • 15th Anniv.
    • Our History
    • Case Studies
    • Distributors
  • Products
    • At a Glance
    • X Processing
    • I.M.D.P.
    • Monitors
    • Timing
    • Calibration
    • Viewfinders
  • Support +
    • Downloads
    • Virtual Mtg.
    • RMA Request
  • News + Events
    • News
    • Events
  • Contact
Signal Processing
I.M.D.P.
Monitors
Timing
Calibration
Viewfinders
Home  //  Signal Processing  //  BrightEye  //  BrightEye 70 HD/SD AES Embedder/Disembedder
be70_rear-800x157be70_rear-800x157
be70_rear-800x157be70_rear-800x157
  • BrightEye 70 HD/SD AES Embedder/Disembedder

    The BrightEye 70 is a dual rate eight channel audio embedder or disembedder for 1.5Gb/s high definition video signals or for 270Mb/s standard definition signals. Four AES ports automatically configure as inputs or outputs depending if the module is configured as mux or demux.

    When configured as a multiplexer, the BrightEye 70 has one serial digital video input and four AES audio inputs. These four AES streams are embedded into the video stream. AES inputs are sample rate converted, allowing the use of asynchronous audio. The output of the module is a digital stream that contains the original video signal and four AES pairs.

    When configured as a demultiplexer, audio signals present in the incoming video signal are extracted and delivered as standard AES digital audio streams.

    The BrightEye 70 includes an eight channel audio mixer with channel swap and shuffle capability that allows you to completely rearrange and remix audio channels. It provides precise control over audio level, with up to 12 dB of gain to compensate for low level sources. All audio processing is performed at full 24 bit resolution by a digital signal processor (DSP). Delay is adjustable up to one second. The Data mode operation allows embedding or disembedding of Dolby E or AC3 signals.

    Product Documents

    Datasheet

    • BE70 Data Sheet

    Manual

    • BrightEye 70 Manual
    Contact Sales
    • Highlights
    • Specifications
    • Product Downloads

    Description

    • Use with Servers, Workstations and Satellite Receivers
    • HD/SD Audio Embedder or Disembedder
    • 8 Channel Audio Mixing
    • Adjustable Delay
    • Data Mode for Dolby E and AC3
    BrightEye 70 Specifications
    Serial Digital Input
    • Number: One
    • Type:
      HD Serial Digital 1.485 Gb/s
      SMPTE 274M, 292M or 296M or SD Serial Digital
      270 Mb/s SMPTE 259M-C
    • Impedance: 75 Ω
    • Return Loss: >15 dB
    • Max Cable Length:
      100 meters for HD
      300 meters for SD (Belden 1694A)
    • HD Standards Supported:
      1080i (SMPTE 274M -4,5,6) 50, 59.94 or 60 Hz
      720p (SMPTE 296M -1,2,3) 50, 59.94 or 60 Hz
      1080p (SMPTE 274M -9,10,11) 23.98, 24, 25 Hz
      1080sF (RP211 -14,15,16) 23.98, 24, 25 Hz
    Serial Digital Output
    • Number: One
    • Type: Follows input
    • Impedance: 75 Ω
    • Return Loss: >15 dB
    • Output: DC None (AC coupled)
    AES/EBU Digital Inputs
    • Number: Four (total of eight channels)
    • Type: AES3id
    • Connector: Coaxial, 75 Ω
    • Bit Depth: 20 and 24 Bit
    • Sample Rate: 30 KHz to 100 KHz (sample rate converted internally to 48 KHz)
    • Crosstalk: <144 dB
    • Dynamic Range: >144 dB
    • Reference Level: -18 or -20 dBFS (selectable) AC-3, Dolby-E Supported when inputs are synchronous
    Embedded Inputs
    • Number:
      Four AES Streams (from video input)
      Eight channels from any two of four groups
    • Channels: Eight
    • Bit Depth: 20 and 24 Bit
    AES/EBU Digital Outputs
    • Number: Four (total of 8 channels)
    • Type: AES3id
    • Connector: Coaxial, 75 Ω
    • Bit Depth: 24 Bit
    • Sample Rate: 48 KHz Synchronous to Video output
    • Reference Level: -18 or -20 dBFS (selectable)
    Embedded Output (In SDI Outputs)
    • Group Assign: Cascade, or Replace any two of four groups
    • Channels: Eight
    • Bit Depth: 24 Bit
    General Specifications
    • Size: 5.625” W x 0.8” H x 5.5” D (143 mm x 20 mm x 140 mm) including connectors
    • Power: 12 volts, 3 watts (100-230 VAC modular power supply)
    • Power Consumption: 12 volts, 8 watts
    • Temperature Range: 0 to 40° C ambient
    • Relative Humidity: 0 to 95% non-condensing
    • Altitude: 0 to 10,000 ft.

    Product Documents

    Datasheet

    • BE70 Data Sheet

    Manual

    • BrightEye 70 Manual

    Related products you might be interested in

    BrightEye 24 SDI to Analog Converter and DisembedderBrightEye 24 is both a disembedder (demultiplexer) and a digital to analog video converter. The incoming serial digital video signal is converted to an analog composite output. Audio signals present in the incoming digital video signal are extracted and delivered as four channels of analog audio. Audio mixing, level adjustments, and channel shuffling are accessed through the BrightEye Control app. Audio group selection is also made through BrightEye Control. A variety of audio connectors and adapters are available for integrating BrightEye 24 to any type of system. Use BrightEye 24 in desktop and broadcast applications.
    BrightEye 30-D Audio ADC and DAC Bi-directional Converter with DelayBrightEye 30-D is a flexible audio converter that can be a two channel, bi-directional ADC and DAC, or it can be configured as a four channel converter. Perfect in desktop, post and broadcast applications, 24 bit processing ensures beautiful audio. As a bi-directional converter, two channels of analog audio are converted to AES digital audio and at the same time an AES stream is converted to two channels of analog. Alternately, the unit can be configured as a four channel AES to analog converter or a four channel analog to AES converter. BrightEye 30-D also serves as a sample rate converter. For example, a digital 44.1 KHz signal from a CD player can be fed to the input and a digital AES3id, 48 KHz signal synchronous to the reference input will be output. Audio mixing, level adjustments, channel shuffling and delay are accessed through the BrightEye Control app. Audio delay adjustments simplify signal integration. A variety of audio connectors and adapters are available for integrating BrightEye 30-D to any type of system. A reference input is provided which allows digital outputs to be synchronized to either a PAL or NTSC video signal or AES reference.
    BrightEye 10 Optical/SDI to Analog/SDI ConverterBrightEye 10 is a digital to analog video converter with both SD SDI (electrical) and fiber optic inputs. Output formats include Beta and SMPTE component, RGB, and composite (with simultaneous Y/C). Video processing, encoding and analog conversion is performed digitally at 12 bits of resolution with 8 x oversampling. Front panel controls select between the optical and SDI input, choose the analog output format, and adjust gain. Video levels can be adjusted through the BrightEye Control app. The reclocked SD SDI output follows the input selector, providing optical to electrical conversion when the optical input is selected. BrightEye 10 combines fiber to SD SDI conversion and QC monitoring in one compact unit.
    BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse GeneratorBrightEye 57 is a genlockable sync generator and test signal generator that can be used as either a slave or master reference generator. It can lock to house reference or it can lock to its own internal precision standard. BrightEye 57 is well suited for remote trucks, post, helicopters and fly packs. 1.5 Gb/s HD, 3 Gb/s HD or SD SDI test signals or black with embedder is output on the SDI BNCs. Composite, Tri-Level Sync and AES digital audio outputs are also provided. There are three user Programmable Outputs that are selectable between AES, LTC, Word clock or 6 Hz Pulse. Analog audio and AES outputs provide tone or silence. Color Black, Bars, Crosshatch, Multi-burst, and SDI Checkfield (Pathogenic) are just some of the signals simultaneously available on the SDI and analog composite outputs. The Cyclops feature adds a motion element to the selected video test signal. An ID slate with user programmable text can overlay the test pattern. The internal Time Code Generator feeds DVITC on the SDI outputs and VITC on the composite outputs, Time Code can also be selected in LTC form on the programmable Aux outputs. In addition to the standard suite of test patterns, users can create custom test patterns on a computer. Using BrightEye Pattern Generator software, simply transfer test patterns to the included Secure Digital flash memory card and then insert the memory card into the front of the BrightEye 57. Test patterns can include motion. File formats supported: .tga, .wav, .mp3, .wma. Many controls can be adjusted through the intuitive front panel. The BrightEye Control app provides a complete user interface for all adjustments and controls. For facilities and manufacturers using 3 Gb/s video, BrightEye units can be combined to form a complete 3G signal chain. The BrightEye 57 test signal generator’s 3G output can be distributed through the BrightEye 43 3G distribution amplifier or the BrightEye 46 and BrightEye 48 E/O 3G fiber optical transmitter/receiver set.

    Looking for something else?

    Signal Processing
    I.M.D.P.
    Monitors
    Timing
    Calibration
    Viewfinders

    Contact Sales

    Fields marked with an * are required

    International

    • Plura Europe GmbH Germany
    • Plura MEA Dubai – UAE
    • Plura ASIA Seoul – S. Korea

    The Americas

    • Arizona Plura Broadcast, Inc. HQ

    Stay in touch for news on the latest in product development

    Fields marked with an <span class="ninja-forms-req-symbol">*</span> are required

    Copyright © 2025 Plura Inc. All Rights Reserved.