I.M.D.P.
Monitors
Timing
Calibration
Viewfinders

Signal Processing

Best-in-class “glue” products tying media system together. Flexible, frame-based and compact signal processing products for video facilities includes modules for video up/down conversion, audio embedding, synchronization, conversion, routing, noise reduction, protection switches, test signal generators and more. We support IP-2110 / 4K / UHD / FHD Video, MPEG, Analog Video and Audio processing.

Signal Processing

Best-in-class “glue” products tying media system together.
Flexible, frame-based and compact signal processing products for video facilities includes modules for video up/down conversion, audio embedding, synchronization, conversion, routing, noise reduction, protection switches, test signal generators and more. We support IP-2110 / 4K / UHD / FHD Video, MPEG, Analog Video and Audio processing.

Product Filters
Series
Avenue(0)
BrightEye(3)
Form-Factor
Stand Alone System(3)
Video Input
4K/UHD SDI(0)
3G HD SDI(2)
HD SDI(2)
SD SDI(2)
Fiber Optic(2)
HDMI(3)
HDMI HDCP(3)
DVI(0)
VGA(0)
ASI(1)
SMPTE 310M(0)
Analog Component(0)
Analog Composite(2)
See 9 moreSee less
Video Output
4K/UHD(0)
3G HD SDI(3)
HD SDI(3)
SD SDI(3)
Fiber Optic(2)
HDMI(2)
HDMI HDCP(1)
ASI(1)
SMPTE 310M(0)
Analog Component(0)
HD Analog Component(0)
Analog Composite(2)
See 8 moreSee less
Video Processing
Cross Conversion(2)
Downconversion(2)
DualPath(1)
Logo Inserter(1)
Picture in Picture(1)
Reference In/Timeable Output(2)
Router(1)
TBC/Frame Sync(2)
Upconversion(2)
See 5 moreSee less
Audio Features
Adjustable Delay(1)
AES(1)
AGC(0)
Analog Audio(0)
Disembedder(0)
Dolby E(0)
Embedder(0)
Mix & Shuffle(0)
See 4 moreSee less
Sync Pulse/Test Signal
Analog(0)
SD SDI(0)
Tri-Level Sync(0)
3G HD SDI(0)
4K/UHD SDI(0)
GPS(0)
HD SDI(0)
Time Code(0)
See 4 moreSee less
Control
Ethernet(2)
USB(0)
RS232(2)
GPIO(0)
SNMP(2)
AveNet(0)
See 2 moreSee less
BrightEye 83-H HDMI to 3G / HD / SD SDI Converter with HDCP Support
Convert HDMI to 3G/HD/SD SDI with the BrightEye 83-H. The output format follows the input, faithfully preserving the input’s resolution and frame rate. Perfect for GoPro, Replay and other video cameras and sources with an HDMI output, BrightEye 83-H presents the serial digital video signal on two BNC outputs. Signal monitoring and control is provided through the included BrightEye Mac and BrightEye PC software.
BrightEye NXT 410-H Clean HDMI-HDCP-SDI Router w/ Up/Down/X Conversion
The BrightEye NXT 410-H Clean HDMI-HDCP-SDI Router with Up/Down/Cross Conversion provides clean and quiet switching of HDCP encrypted content to its HDMI output along side SDI and non-encrypted HDMI sources. The BrightEye NXT 410-H lets you dissolve or cut between HDMI sources such as cameras or disk players, traditional SDI sources and HDCP encrypted devices for output to an HDMI display or projector. The router’s built-in frame syncs ensure an instantaneous, clean switch or dissolve between every source without flashing or unexpected black displays, even with completely asynchronous sources. Non-HDCP encrypted HDMI and SDI sources can be routed to SDI destinations independently and simultaneously. HDCP encrypted sources cannot be routed to SDI destinations. Muting Disable available with signed waiver to support HDCP Encrypted Content. Use Encrypted and Non-Encrypted HDMI Along Side SDI Sources The ability to use HDMI sources and SDI sources along side one another is perfect for live applications in remote trucks and news vehicles. Devices such as set top boxes and Blu-ray players can be switched and mixed with SDI devices and HDMI cameras to the HDMI output seamlessly and instantaneously. Convert While You Route The BrightEye NXT410-H Compact Router with U/D/C and Clean and Quiet Switching allows format conversion to take place while routing signals to destinations. Now, various formats of high definition and standard definition content can be converted to a common format and routed seamlessly to destinations. Standard definition sources can be up converted to high definition as part of the routing process, as well as cross converting from one HD format to another. All you have to do is select a SMPTE standard to output to a particular destination, and all sources routed to that destination will be converted to the format. Control From Anywhere The unique web-browser user interface allows control and set-up from virtually anywhere via any web browser enabled device, while front panel controls allow complete configuration and control of the router without the use of a computer. In addition, they can be externally controlled through either TCP/IP or DB9 connector under automation control. Router Salvos for Multi-Destination Simultaneous Routing Use salvo memory registers to execute several routes simultaneously. Eight separate salvo registers can be created and then triggered with any web browser enabled device. Integrate HDMI and SDI I/O With both HDMI and SDI inputs and outputs, the NXT 410-H makes it easy to integrate and switch signals from all types of equipment, regardless of the video format. Cameras with HDMI outputs can be used directly alongside SDI sources, and seamlessly routed to either HDMI or SDI outputs. The SFP (small format plugable) cage can be populated with dual SFPs that have fiber optic or other connectors, allowing you to determine the best connector for your installation. Adding SFPs gives you true flexibility in combining electrical BNC, HDMI and fiber optic inputs and outputs. Control From Third Party Devices BrightEye NXTs can be controlled from third party devices using serial protocols via TCP/IP, RS-232 and SNMP. If RS-232 control is desired, please specify at time of purchase and your unit will come with the connector cable pre-installed. Field installation after the fact is not supported.
BrightEye NXT 910 4 Channel HDMI/SDI Frame Sync with HDCP Support
The new BrightEye NXT 910 HDMI/SDI Frame Synchronizer is perfect solution for Blu-Ray players, satellite receivers, GoPro’s and other HDMI devices. The NXT 910 packs tons of features in a tiny package, including Frame Synchronization and Format Conversion, with 16 channels of embedded Audio. The NXT 910 has four independent frame synchronizers. Each supports automatic input format detection and conversion to desired output format. Adjust video and chroma gains with the built-in Proc Amp. Color Correct to compensate for input material or to match projectors and monitors. Adjust levels and swap/mix channels in Embedded Audio. Even embedded surround sound (Dolby, AC-3) is synchronized from input to output. Control the Frame Syncs and monitor each channel’s input and output from the front panel, or through the interactive Web interface. Rackmount three NXT 910s in a single RU for the ultimate processing density. Muting Disable available with signed waiver to support HDCP Encrypted Content.

Looking for something else?

I.M.D.P.
Monitors
Timing
Calibration
Viewfinders