• Skip to main content
  • Why Plura
    • Our Team
    • Videos
    • 15th Anniv.
    • Our History
    • Case Studies
    • Distributors
  • Products
    • At a Glance
    • X Processing
    • I.M.D.P.
    • Monitors
    • Timing
    • Calibration
    • Viewfinders
  • Support +
    • Downloads
    • Virtual Mtg.
    • RMA Request
  • News + Events
    • News
    • Events
  • Contact
  • Why Plura
    • Our Team
    • Videos
    • 15th Anniv.
    • Our History
    • Case Studies
    • Distributors
  • Products
    • At a Glance
    • X Processing
    • I.M.D.P.
    • Monitors
    • Timing
    • Calibration
    • Viewfinders
  • Support +
    • Downloads
    • Virtual Mtg.
    • RMA Request
  • News + Events
    • News
    • Events
  • Contact
Signal Processing
I.M.D.P.
Monitors
Timing
Calibration
Viewfinders
Home  //  Signal Processing  //  Avenue  //  Avenue 7630 and 7635 Dolby E, Dolby D and AC-3 Encoder Sub Module and Software Key Option
avenue_7630_pcb-1021x623avenue_7630_pcb-1021x623
  • Avenue 7630 and 7635 Dolby E, Dolby D and AC-3 Encoder Sub Module and Software Key Option

    The 7630 Encoder sub module option supports Dolby E signals. The 7635 Encoder sub module option supports Dolby D and AC-3 signals. The 7630 or 7635 fits onto Avenue modules that benefit from comprehensive audio handling. In addition to the hardware sub module, a unique software key is provided for activation.

    The 7630 or 7635 encoder is fed from selected outputs of the main module’s channel mixer and shuffler. The resulting encoded bitstream can be output both on an AES output and embedded into the SDI output.

    The 7630 or 7635 are for use with the following modules:

    • 7555 HD / SD Video Processing Frame Synchronizer

    • 7660 HD / SD Embedder, Disembedder and Data Inserter

    • 9550 3G / HD / SD Video Processing Frame Synchronizer

    • 9600 3G / HD / SD Embedder, Disembedder and Data Inserter

    The 7555 or 9550 are recommended for use with the 7615, 7630 and 7635 due to the 1 frame delay in the Dolby processors

    For complete audio processing, these modules can be fitted with both the 7615 Decoder and a 7630 or 7635 Encoder at the same time. One analog audio channel per encoder/decoder is used for data.

    Product Documents

    Datasheet

    • 7630 Data Sheet
    Contact Sales
    • Highlights
    • Specifications
    • Product Downloads

    Description

    • Avenue 7630 supports Dolby E Encoding
    • Avenue 7635 supports Dolby D and AC-3 Decoding
    • Supported by Avenue 7555, 7660, 9550, and 9600.
    • Avenue 7555 or 9550 recommended.
    • Combine with Avenue 7615 for complete Dolby audio processing with Encode and Decode

    Additional information

    Audio Features

    Dolby E

    Control

    Ethernet, RS232, SNMP, AveNet, GPIO

    Product Documents

    Datasheet

    • 7630 Data Sheet

    Related products you might be interested in

    BrightEye 30-D Audio ADC and DAC Bi-directional Converter with DelayBrightEye 30-D is a flexible audio converter that can be a two channel, bi-directional ADC and DAC, or it can be configured as a four channel converter. Perfect in desktop, post and broadcast applications, 24 bit processing ensures beautiful audio. As a bi-directional converter, two channels of analog audio are converted to AES digital audio and at the same time an AES stream is converted to two channels of analog. Alternately, the unit can be configured as a four channel AES to analog converter or a four channel analog to AES converter. BrightEye 30-D also serves as a sample rate converter. For example, a digital 44.1 KHz signal from a CD player can be fed to the input and a digital AES3id, 48 KHz signal synchronous to the reference input will be output. Audio mixing, level adjustments, channel shuffling and delay are accessed through the BrightEye Control app. Audio delay adjustments simplify signal integration. A variety of audio connectors and adapters are available for integrating BrightEye 30-D to any type of system. A reference input is provided which allows digital outputs to be synchronized to either a PAL or NTSC video signal or AES reference.
    BrightEye Rack Mount and Power SuppliesBrightEye Rack Mount You can install 3 to 6 BrightEyes with the optional BERKMT-Full rack mount kit. 6 single high units or 3 double high units fit in just 1RU. BrightEye Individual Power Supply Power a single BrightEye unit with this universal (100/240V, 50/60Hz) power supply. Power supply p/n 23118900 2.5A supply is for use with: BrightEye models 1 – 94; BrightEye Mitto; Avenue 5830 Router Control Panel; Avenue Tabletop Control Panel; and Avenue GPI Control Panel Power supply p/n 23600106 5A supply is for use with: BrightEye NXT; Avenue 1RU Frame; and BEPS6 Spider Power Supply – BEPS6 Power up to 6 BrightEyes with this universal (100/240V, 50/60Hz) power supply. Redundant power supply for Spider available, BEPS6-RP. (Powers up to 6 BrightEye models 1 – 94 and Mitto; not for use with BrightEye NXT)
    BrightEye 71 & 71-F HD/SD 8 Channel Analog Audio Embedder/DisembedderThe BrightEye 71 is a dual rate eight channel analog audio embedder or disembedder for 1.5Gb/s high definition video signals or for 270Mb/s standard definition signals. The analog audio ports automatically configure as inputs or outputs depending if the module is configured as mux or demux. When configured as a multiplexer, the BrightEye 71 has one serial digital video input and eight analog audio inputs. The audio streams are embedded into the video stream. The output of the module is a digital stream that contains the original video and audio signals. When configured as a demultiplexer, audio signals present in the incoming video signal are extracted and delivered as analog audio. The BrightEye 71 includes an eight channel audio mixer with channel swap and shuffle capability that allows you to completely re-arrange and re-mix audio channels. It provides precise control over audio level, with up to 12 dB of gain to compensate for low level sources. All audio processing is performed at full 24 bit resolution by a digital signal processor (DSP). Delay is adjustable up to one second. Order the BrightEye 71-F if you need an optical output.
    BrightEye 90-A HD Up/Down Cross Converter and ARC with Analog AudioBrightEye 90-A is a versatile up/down/cross converter or aspect ratio converter for use with analog and digital video signals. Simply set the BrightEye 90-A to output your facility’s preferred HD or SD standard. The BrightEye 90-A will accommodate whatever input you connect – analog composite, SD SDI or HD SDI. After setting the output standard, BrightEye 90-A automatically converts the selected input to the correct standard for your facility. BrightEye 90-A will upconvert, downconvert, cross convert, or act as an ARC, as needed. The built-in Frame Synchronizer allows you to feed asynchronous signals to the BrightEye 90-A. An external reference input allows genlock to a house reference. All vertical interval data and closed captioning is faithfully passed. Upconverting to High Definition Feed the analog composite or SD SDI output of a camera to a BrightEye 90-A and upconvert to HD. You can take the HD signal from the BrightEye 90-A into a switcher or projection system. Upconverting existing SD equipment lets you leverage the equipment you already have and operate in the HD domain. While some cameras may have firewire out, using the video output and upconverting before distribution is preferable since longer cable runs can be achieved and quality is superior. Additionally, the BrightEye 90-A’s reference input allows you to time the upconverted video output for use with a production switcher. Downconverting to Standard Definition BrightEye 90-A will downconvert any type of HD signal and provides both an SD SDI and an analog composite output suitable for broadcast or monitoring. Cross Conversion It’s easy to convert between various HD standards, whether 720p or 1080i. Simply select the output standard you need and connect the input, that’s all there is to it. Aspect Ratio Conversion For converting between SD 4:3 and HD 16:9, BrightEye 90-A has you covered. Just select the output standard you need and connect the input. Audio Processing Made Simple BrightEye 90-A handles both embedded audio and eight channels of analog audio. Sixteen channels of embedded audio are supported in BrightEye 90-A. If the incoming video has embedded audio, the audio will be safely bypassed around the video processing and lipsync will be preserved. Audio mixing is available for two of the four embedded groups of audio. The analog audio I/O ports can be configured for eight channels of incoming audio or for eight channels of audio output. The audio mixer can be used for analog audio as well. Mixer controls are accessed through the BrightEye Control Software. Monitoring for Video and Audio Audio monitoring is easy with BrightEye 90-A’s convenient 3.5mm mini jack. Select the audio channels you want to monitor from the front panel and plug in a headset. The HDMI connector on the rear of the unit provides a future proof monitoring interface. Plug it into most LCD monitors for confidence monitoring of your feed. Front Panel and Software Control Input selection, gain control, and test pattern controls are provided through the front panel interface. Audio presence LEDs indicate which channels are detected. Controls for crop, letterbox and pillarbox are accessed from the front panel or BrightEye Mac or PC software. Video and audio levels and the audio mixer can be adjusted through BrightEye Mac or PC software.

    Looking for something else?

    Signal Processing
    I.M.D.P.
    Monitors
    Timing
    Calibration
    Viewfinders

    Contact Sales

    Fields marked with an * are required

    International

    • Plura Europe GmbH Germany
    • Plura MEA Dubai – UAE
    • Plura ASIA Seoul – S. Korea

    The Americas

    • Arizona Plura Broadcast, Inc. HQ

    Stay in touch for news on the latest in product development

    Fields marked with an <span class="ninja-forms-req-symbol">*</span> are required

    Copyright © 2025 Plura Inc. All Rights Reserved.