Signal Processing
I.M.D.P.
Monitors
Timing
Calibration
Viewfinders
be46_front-800x157be46_front-800x157

BrightEye 46 3G/HD/SD/ASI Electrical to Optical Converter

BrightEye 46 is an electrical to optical converter and distribution amplifier that can be used with standard definition video signals, 3 Gb/s and 1.5 Gb/s high definition signals, or ASI signals. The video input is reclocked and presented on four BNCs and is also converted to an optical signal and presented on an optical LC connector. This optical output can drive single mode fiber to a distance of 20 kilometers. With an optical launch power attenuator, multi-mode fiber can also be used with BrightEyes.

Product Documents

Datasheet

Manual

Contact Sales

Description

  • Optical Transmitter
  • Electrical to Optical Converter
  • Use with HD or SD signals
  • Use with ASI Signals
  • 3G HD, Level A or Level B supported
  • Serves as a Distribution Amplifier
  • Passes Embedded Audio
Serial Digital Input
  • Number: One
  • Signal Type:
    270 Mb/s SD Serial Digital (SMPTE 259M)
    1.485 Gb/s HD Serial Digital (SMPTE 274M or 296M)
  • Impedance: 75 Ω
  • Return Loss: >15dB
  • Max Cable Length:
    300 meters for 270 Mb/s
    100 meters for 1.485 Gb/s
  • Automatic Input Cable Equalization
Serial Digital Output
  • Number: Four
  • Signal Type: HD/SD/ASI Serial Digital (SMPTE 259M or SMPTE 274M or 296M), follows input
  • Impedance: 75 Ω
  • Return Loss: >15 dB
  • Output DC: None (AC coupled)
Optical Output
  • Number: One
  • Type: SD and ASI (SMPTE 297M, optical equivalent of 259M); HD (SMPTE 274M, 292M or 296M)
  • Wavelength: 1310 nm (1550 by special order)
  • Power: -7 dBm
  • Max Cable Length: 20 km
  • Fiber Type: Single Mode or Multi-mode compatible with 8 dB attenuation at transmit end
  • Connector: LC
General Specifications
  • Size: 5.625” W x 0.8” H x 5.5” D (143 mm x 20 mm x 140 mm) including connectors
  • Power: 12 volts, 3 watts (100-230 VAC modular power supply)
  • Temperature Range: 0 to 40° C ambient
  • Relative Humidity: 0 to 95° non-condensing

Product Documents

Datasheet

Manual

Related products you might be interested in

BrightEye 10 Optical/SDI to Analog/SDI ConverterBrightEye 10 is a digital to analog video converter with both SD SDI (electrical) and fiber optic inputs. Output formats include Beta and SMPTE component, RGB, and composite (with simultaneous Y/C). Video processing, encoding and analog conversion is performed digitally at 12 bits of resolution with 8 x oversampling. Front panel controls select between the optical and SDI input, choose the analog output format, and adjust gain. Video levels can be adjusted through the BrightEye Control app. The reclocked SD SDI output follows the input selector, providing optical to electrical conversion when the optical input is selected. BrightEye 10 combines fiber to SD SDI conversion and QC monitoring in one compact unit.
BrightEye 41 Video/AES/Tri-Level Sync Distribution AmplifierBrightEye 41 is a distribution amplifier that accepts analog video, AES digital audio, or Tri-Level Sync signal. It can also be used with SMPTE 310M, Dolby E and AC-3 signals. It provides unity gain fanout over a frequency range of DC to 10 MHz. It can handle composite and component analog video, coaxial AES digital audio, or a High Definition Tri-Level Sync signal. When using a digital to analog video converter and multiple outputs are needed, BrightEye 41 can be used to distribute and provide those additional output signals. BrightEye 41 works well with video converters BrightEye 10 and BrightEye 16. BrightEye 41 is also useful in conjunction with any of the BrightEye SPG/TSGs, for distributing Tri-Level Sync, AES and composite signals.
BrightEye 70 HD/SD AES Embedder/DisembedderThe BrightEye 70 is a dual rate eight channel audio embedder or disembedder for 1.5Gb/s high definition video signals or for 270Mb/s standard definition signals. Four AES ports automatically configure as inputs or outputs depending if the module is configured as mux or demux. When configured as a multiplexer, the BrightEye 70 has one serial digital video input and four AES audio inputs. These four AES streams are embedded into the video stream. AES inputs are sample rate converted, allowing the use of asynchronous audio. The output of the module is a digital stream that contains the original video signal and four AES pairs. When configured as a demultiplexer, audio signals present in the incoming video signal are extracted and delivered as standard AES digital audio streams. The BrightEye 70 includes an eight channel audio mixer with channel swap and shuffle capability that allows you to completely rearrange and remix audio channels. It provides precise control over audio level, with up to 12 dB of gain to compensate for low level sources. All audio processing is performed at full 24 bit resolution by a digital signal processor (DSP). Delay is adjustable up to one second. The Data mode operation allows embedding or disembedding of Dolby E or AC3 signals.
BrightEye 11-HD HD/SD SDI to Analog ConverterBrightEye 11-HD provides HD or SD digital to analog video conversion with the full range of analog output formats available for HD and SD. When an HD input is present HD RGB or YPrPb are output. When an SD input is present Beta, SMPTE, RGB or composite with simultaneous Y/C is output. 12 bit processing and conversion at 8 x oversampling mean the best looking images possible. Output format and gain are controlled from the front panel. A status display indicates input presence. Video levels can be adjusted through the BrightEye Control app.

Looking for something else?

Signal Processing
I.M.D.P.
Monitors
Timing
Calibration
Viewfinders

Contact Sales