Signal Processing
I.M.D.P.
Monitors
Timing
Calibration
Viewfinders
be01_front-800x157be01_front-800x157

BrightEye 1 Analog/SDI to SDI/Optical Converter with TBC and Frame Sync

BrightEye 1 is a comprehensive solution to signal acquisition. With analog component, analog composite S-Video (Y/C), and SDI video inputs, it can take on any video source. The built-in Time Base Corrector/Frame Synchronizer provides a rock steady output — even with marginal inputs. The reference input is used to genlock the converter output to house reference such as color black.

Front panel controls select input source, format and adjust video gain. Video levels can be adjusted through the BrightEye Control app.

Simultaneous SD SDI (electrical) and Optical outputs are provided, so you can deliver the signal just about anywhere. Both Color Bars and the SD SDI Checkfield (Pathological) test patterns are included to facilitate transmission path testing.

Product Documents

Datasheet

Contact Sales

Description

  • Use with Cameras, Satellite Receivers and VHS Decks
  • Analog and SD SDI Input
  • SD SDI and Optical Output
  • TBC and Frame Sync
  • 12 Bit Processing

Related products you might be interested in

BrightEye Control SoftwareBrightEye Control allows you to access all of the controls in your BrightEye devices. Adjust video levels, output timing and audio mixing and more. No DIP switches or button hold-downs are needed. Firmware updates, with feature enhancements and bug fixes, are provided for the lifetime of your BrightEye device. Install them with ease from your Mac or PC using BrightEye Control. The BrightEye Control software is included with each BrightEye at no charge. Version History BrightEye Control Mac 3.1.0 Built for Intel x86 64-bit. Compatible with Apple Silicon Macs via emulation. Compatible with macOS 10.15+ BrightEye Control 3.0.2 Further improvements to connection reliability, especially with older BrightEye devices. Fixes issue with recalling saved settings on units with memory registers. Previously, recalling the saved settings could trigger memory register recalls. You can now set string controls to “”, which allows you to properly remove a feature license. Fixes several crashes related to connecting and disconnecting BrightEye devices. Other small fixes and enhancements. BrightEye Control 3.0.1 Improved Connection Reliability Fixed problem where updating BrightEye firmware was sometimes slow. BrightEye Control 3.0.0 Replaces BrightEye Mac and BrightEye PC. Improved user interface to make controlling BrightEye devices easier than ever. BrightEye devices now show up in the interface automatically, no need to manually refresh. Improved performance when controlling many BrightEye devices. Support for HiDPI and “Retina” displays. Fixed issues with firmware updates on newer Windows PC’s. Many other bug fixes and enhancements.
BrightEye 71 & 71-F HD/SD 8 Channel Analog Audio Embedder/DisembedderThe BrightEye 71 is a dual rate eight channel analog audio embedder or disembedder for 1.5Gb/s high definition video signals or for 270Mb/s standard definition signals. The analog audio ports automatically configure as inputs or outputs depending if the module is configured as mux or demux. When configured as a multiplexer, the BrightEye 71 has one serial digital video input and eight analog audio inputs. The audio streams are embedded into the video stream. The output of the module is a digital stream that contains the original video and audio signals. When configured as a demultiplexer, audio signals present in the incoming video signal are extracted and delivered as analog audio. The BrightEye 71 includes an eight channel audio mixer with channel swap and shuffle capability that allows you to completely re-arrange and re-mix audio channels. It provides precise control over audio level, with up to 12 dB of gain to compensate for low level sources. All audio processing is performed at full 24 bit resolution by a digital signal processor (DSP). Delay is adjustable up to one second. Order the BrightEye 71-F if you need an optical output.
BrightEye 16 SDI to Analog Video Converter with Frame Sync/Genlock and Audio DisembedderBrightEye 16 is a digital to analog video converter with a timeable output. It’s perfect for feeding analog switchers and routers, where signal timing is required. It’s also a disembedder and provides four analog audio outputs. With timing controls, proc adjustments, and a built-in audio mixer, BrightEye 16 provides a complete solution for digital to analog conversion. BrightEye 16 has an SDI video input and a reference input. The input signal is converted to analog composite and synchronized (genlocked) to the reference signal. The analog composite output is fully timed with respect to the reference, including ScH phase. Audio is disembedded with 24 bit precision and converted to analog. Basic controls are accessed on the front panel. Use the BrightEye Control app to access video proc controls and the built-in audio mixer. The vertical interval can be passed or blanked. VU indication is provided on the front panel and BrightEye Control.
BrightEye 55 Genlockable Sync Generator and Test Signal GeneratorBrightEye 55 is a genlockable sync generator and test signal generator that can be used as either a slave or master reference generator. It can lock to house reference or it can lock to its own internal precision standard. BrightEye 55 is well suited for remote trucks, desktop and fly packs. Color Black, Bars, Crosshatch, Multi-burst, and SDI Checkfield (Pathological) are just some of the signals simultaneouslyavailable on the SDI and analog composite outputs. An ID slate with user programmable text can overlay the test pattern. The cyclops feature adds a motion element to the video test signal, handy for live applications. The Tri-Level Sync output provides reference to high definition equipment, such as VTRs, disc recorders and workstations. There are a wide variety of user selectable formats including: 720p, 1080i, 1080sF, and 1080p. Format selections and other controls are accessed through the BrightEye Control app. AES 3id digital audio, analog audio and embedded audio reference outputs are provided.

Looking for something else?

Signal Processing
I.M.D.P.
Monitors
Timing
Calibration
Viewfinders

Contact Sales

Fields marked with an * are required