SFP-25G / SFP-25G-H / SFP-10G Series
“TRUE-IP 25GbE/10GbE 2110 4K UHD and 3G FHD Series”
We’re excited to announce the release of the NEW Web UI 5.0.0 for the Plura IP 2110 monitor SFP-25G, SFP-25G-H and SFP-10G series during IBC 2023 highlighting, NEW NMOS tab for wide range of configurations, Ember+ extensive tree for all 2110 settings, optimized Ember+ monitoring and Media LAN System Status “MLSS” display and many more.
SFP-25G & SFP-25G-H the Industry’s FIRST & ONLY TRUE-IP 25GbE broadcast & media monitor solution, supporting uncompressed UHD and FHD based on SMPTE ST 2110 & ST 2022-7 and supports up to 4096 x 2160 resolutions.
The new firmware will deliver fresh new enhancements and tools such as:-
- NMOS tab with configurable registry mode, registry address, registry port, mDNS mode, DNS server address, and Domain Name.
- NMOS status reporting: registry status, uptime, connection count, and DNS registry service.
- Ember+ out band control configuration for entire ST-2110 settings, such as :
- Main configurations
- Aux Configurations
- Audio Mapping
- PTP, In-band Network Configurations
- NMOS
- Added modules reboot button in Control page on Monitor control side.
- Optimizations for serial communications.
- Optimized monitor MLSS menus.
- Optimized Ember+ monitoring.
- Optimized IP 2110 monitor thread.
- Enhanced in MLSS2 ports in the monitor menu incase of any invalid values.
- Enhanced IP 2110 UHD video format menu changes.
- Changed power on/off labels to LCD Display on/off.
- Converted “I” information button from webpage pdf to downloadable zip folder which contains monitor upgrade, 2110, and jpeg-xs instructions.
- Added support for Media LAN network interface VLAN ID and Enable (clearing and status logs).
- Added logs for wrong-speed SFP module condition.
- Enhanced any issues with invalid handling of the mute label on MLSS3 Audio Mapping.
All above new capabilities will enhance user monitoring and make displaying stream data faster and more convenient than ever before. With major increases in data analysis and information for the Media LAN streams in multiple layers, more efficient and comprehensive display platform, intuitive messaging platform, enhanced Plura Web UI interface and various models / sizes to fit your applications.
This article promises to be packed with useful information!
The new Web UI 5.0.0 will include the below new addendums and enhancements
– NMOS configuration and status
- NMOS Configuration and status
- Registry Status
- Uptime (secs)
- Connection Count
- DNS Registry Service
- NMOS configuration
- Registry Mode:- Auto or Manual
- Registry Address
- Registry Port
- mDNS Mode
- Domain Name
– Ember+ monitor out-band control tree
– Ember+ Expanded 2110 out-band control tree
SFP-25G, SFP-25G-H and SFP-10G Interoperability
Ember+, NMOS, JT-NM Interoperability Support
- Management Interface support (NMOS, In-band) and (Web UI / Ember+, via the Out-band control network port)
- NMOS IS-04 discovery and registration
- NMOS IS-05 device connection management
- JTNM NMOS certification support
- JSON snippet for NMOS control support
- Ember+ support with extensive Ember+ tree control
- Session Description Protocol “SDP” file support
- IGMP V2 & V3 support
- Plura IP 2110 web user interface “UI” support
- ST 2059-1/-2 provisions, Signal will be locked to PTP and aligned to ST 2059 provisions
ST 2110, ST 2022-7 & PTP/ST 2059 V2
- ST 2110-10, System architecture and synchronization: essences, RTP, SIP and PTP
- ST 2110-20, Uncompressed video transport, Wide / Narrow types
- ST 2110-21, Traffic shaping and network delivery timing
- Dual video compressed channels ST-2110-22
- Configurable video compression rate 5:1 & 13:1
- ST 2110-30, Audio transport profile level C, 16CH, 48Khz sample rate, 1ms/.125μs
- Audio AES3 compressed ST-2110-31 support
- ST 2110-40, Transport of ancillary data
- ST 2022-7 seamless protection switching providing data loss protection