The VM module amplifies one 10 MHz sinus signal to six individual 10 MHz outputs. In case of a faulty signal output, a seventh amplifier can be switched to one of the six distributing ports.
- LTCdecoder for MTD
- Four built-in amplifiers
- Distribution amplifier for serial telegrams
- Four RS232 and RS422 interfaces
Example of a 10 MHz distribution system, 12 outputs
Example of a redundant 10 MHz distribution system, 17 outputs
In order to ensure a fail-safe operation, all signals are analyzed and monitored. In the event of an error, the appropriate output is switched to the reserve amplifier. The changeover is programmable as follows:
Available functions can be selected by configuration over the housing’s USB interface. If a RUB IE Ethernet module is on hand, configuration can also be made via a standard web browser.
- Immediately (automatically)
- At a specified time (automatically)
- Manually (by pushing one of the programmable keys)
A status monitor can be accessed at any time. SNMP is available in combination with an IE module.
Product Model ID: RUB VM Module description Distribution module 1:6 10MHz continuous wave with output monitoring and a redundant change-over switcher RUBIDIUM series 1 & 3 Distribution Module