Added support for (v3) hardware with RGB display

Please find more about updates of Plura timing products here.

In LTC:MTD user mode, the colors of Time, Date, and Timecode timers were mixed up

Please find more about updates of Plura timing products here.

For UD Stage displays, removed useless "Operate" tab in NTP mode

Please find more about updates of Plura timing products here.

Profiles are stored as file "tcc70.tci" to disk, rather than "ProcessPage"

Please find more about updates of Plura timing products here.

Added local time zone settings to SMPTE Synchronization Metadata of PTP management packets

Please find more about updates of Plura timing products here.

Profiles are stored as file "rubidium.tci" to disk, rather than "ProcessPage"

Please find more about updates of Plura timing products here.

Fixed spurious reboots with older IE module hardware (not v2)

• Current IE (v2) module was not affected.

Please find more about updates of Plura timing products here.

Updated support for option 88

Please find more about updates of Plura timing products here.

Added support for latest hardware version

Please find more about updates of Plura timing products here.

Show all active IP connections of R3 option on page Ethernet

Please find more about updates of Plura timing products here.

Clarified polarity of LTC input

• Since LTC's biphase mark modulation ignores polarity, it doesn't matter if A and B inputs are swapped.

Please find more about updates of Plura timing products here.

Enhanced robustness of Timer Request Protocol against overload

Please find more about updates of Plura timing products here.

Added support for UD100-4N Stage display

Please find more about updates of Plura timing products here.

Added support for option 88

Please find more about updates of Plura timing products here.

Added support for SPTH1 (v3)

Please find more about updates of Plura timing products here.

Added new commands to Timer Request Protocol

• Added Main timers to Subscribe, Unsubscribe and Get commands.
• Added Subscribe.Main and Unsubscribe.Main commands.
• Added Control.OffsetPlus and Control.OffsetMinus commands.

Please find more about updates of Plura timing products here.

Added "Ignore Stratum" feature

• The setting allows use of NTP servers that deliver stratum 0 (unspecified or invalid).
• Use with care and make sure that the server is delivering a valid time anyway.

Please find more about updates of Plura timing products here.

Added support for option 26

Please find more about updates of Plura timing products here.

Added ATC LTC and ATC VITC to video inserter's MTD Read sources

Please find more about updates of Plura timing products here.

Reworked illustration in chapter "First Steps".

Please find more about updates of Plura timing products here.

Modified Ethernet Auto-Negotiation

Please find more about updates of Plura timing products here.

Added G3 module to File/New and to Tools/Create MIB File... menus

Please find more about updates of Plura timing products here.

Added C3 and G3 modules to RUB Series Manual

Please find more about updates of Plura timing products here.

Added lightning protection specification to ANTG

Please find more about updates of Plura timing products here.

Added new Art-Net commands

• Added Tally Color and Tally Mode to Art-Net protocol.

Please find more about updates of Plura timing products here.

Added a manual describing serial protocols of UD displays

Please find more about updates of Plura timing products here.

TCC70 Configuration tool identifies itself as 'TCC70 Configuration' again.

• This re-enables it to configure TCC70 series.
• Bug was introduced in version 2.25.24.

Please find more about updates of Plura timing products here.

Clarified polarity of LTC input

• Since LTC's biphase mark modulation ignores polarity, it doesn't matter if A and B inputs are swapped.

Please find more about updates of Plura timing products here.

Re-enabled font compiler

• Bug was introduced in version 2.25.17.

Please find more about updates of Plura timing products here.

Re-enabled Art-Net configuration tab in all source modes

• Bug was introduced in version 15.19.

Please find more about updates of Plura timing products here.

Removed AC power connector from rear drawing

Please find more about updates of Plura timing products here.

Updated PoE+ power limits

Please find more about updates of Plura timing products here.

Enhanced handling large time jumps of NTP server

Please find more about updates of Plura timing products here.

Added DTG126-12 technical data

Please find more about updates of Plura timing products here.

Initial release of DTG Series displays

Please find more about updates of Plura timing products here.

Added StreamId selection to Art-Net ArtTimeCode reader

• StreamId was added to Art-Net 4 specification in revision DK.

Please find more about updates of Plura timing products here.

Added software update check

• Added "Check for Update" to "Help" menu and to "About..." dialog box for easy downloading of updates of the configuration tool.
• Requires Internet access.

Please find more about updates of Plura timing products here.

Added release notes to most timing products

• For an example see: PCIe 3G / Product Downloads / Firmware / Release Notes.

Please find more about updates of Plura timing products here.

Enabled OFFSET+ and OFFSET- function keys

• For OFFS TIME, DIFF TIME, OFFS TC and DIFF TC timer modes.

Please find more about updates of Plura timing products here.

Fixed blue display color

Please find more about updates of Plura timing products here.

Removed superfluous menu items that are not bound to existing software options

• Bug was introduced in version 2.25.6.

Please find more about updates of Plura timing products here.

New setting "Auto" for local time zone in RUB GT

• Works the same as "Auto + Reference Check" but omits the "Reference Check".
• To use it set "Reference / Time Zone and DST Mode / Local Time Zone" to "Auto".

Please find more about updates of Plura timing products here.

Added flash size to System / Info

Please find more about updates of Plura timing products here.

Initial release of UD Stage displays

Please find more about updates of Plura timing products here.

Added support for UD Stage displays

Please find more about updates of Plura timing products here.

Added support for option 22

Please find more about updates of Plura timing products here.

Fixed broken signature of status monitor

• Bug was introduced in version 2.24.48.

Please find more about updates of Plura timing products here.

DNS servers can be configured

• After configuring DNS servers on "System" page, the Syslog server as well as NTP client’s hosts can be configured as DNS names rather than IP addresses.

Please find more about updates of Plura timing products here.

Fixed a bug that potentially damages PCIe (v2) cards

• Original PCIe cards (not "v2") are not affected.

Please find more about updates of Plura timing products here.

Added automatic insertion color of MTD timers

• "Read / MTD / Color" in configuration enables insertion of MTD timers with actual color including automatic color change.

Please find more about updates of Plura timing products here.

Update to latest revision of other UD displays

Please find more about updates of Plura timing products here.