The Rubidium series module XT (the new replacement for Rubidium series module DT) is Time Code inserter and converter designed to work with different video formats. All Time Code and data formats are processed by a built-in reader and/or generator which is compliant to the EBU/SMPTE standards.
Both modules have almost identical features and differ mainly in the type of video that they can process:
- RUB DT: Digital video channel (SDI), window insertion, DVITC- and ATC Time Code, Ancillary Data, UMID
- RUB XT: Digital video channel (3G, HD-SDI and SDI) window insertion, DVITC- and ATC-Time Code, Ancillary Data, UMID
- Download PDF
Module System Diagram
Module Control Panel
RUBIDIUM H1 DT / XT modules rear view
RUBIDIUM H3 DT / XT module rear
RUBIDIUM H1 DT / XT modules front view
- Time Code Reader
- Time Code Converter
- Time Code Inserter
- LTC, DVITC, ATC, UMID, Ancillary Data
- SDI (DT), 3G/HD/SD (XT)
- MTD compatible
- TC_link compatible
- Programmable in/output GPIs
- 4 programmable front profile buttons
The follwing options enable further functionalities
- Video bypass relay (option B)
- Sony 9P protocol converter (option S)
- Programmable offset (option O)
- Converter biphase/CTL to LTC(option P)
The rear panel provides the following connectivities:
- LTC reader and generator
- RS485/422/232 interface, Time Code or inserter data
- 4 GPIOs for status signals, etc.
- Relay contact output, programmable for Time Code zero value, additional failure Signal(s), etc.
Four configurable function keys are located on the front panel, allowing fast selection of functions or loading preset profiles. Backlit keys and four signal LEDs indicate the status of the module. A blue identification button shows the module’s model name.
Modules can be inserted in any order into the slots of the housing. Each slot position has its own address within the communal housing identification system. This enables a specific identification of each module within a bigger system. Alias names can be given to the hard stamped numerical address via the supplied configuration software.
Via our IE Ethernet module, browser configuration, status control and SNMP functions are available. Every module is connected to an internal hot swappable bus, which bilaterally connects all modules within a particular housing. The internal bus can be distributed over several housings by using the RLC port. The RLC-plug contains a voltage feed, a failure relay output and a TC_link interface. TC_link is a real time capable proprietary interface, which is based on a customized RS485 interface.
On the rearside of every housing, a PC interface (USB) can be found. This serial connection is used for configuration, status control, and also software and firmware updates.
All data and Time Code formats received via RS232/422, LTC/VITC and TC_link can be inserted and converted.
Up to fifteen separate user configurable windows can be inserted. Each inserter window has its own character set, character / windows attributes and source data. This defines the size of the window, as well as the character size and type. The inserters specifications can be stored and recalled via the configuration program as a profile. These profiles can be selected via the front-sided backlit buttons or via the serial PC configuration port.
Web Browser Configuration
Up to eight character sets from the local characters memory are stored in the module and can be recalled simultaneously for insertion.
The DT/XT supports full multicolour insertions.
All insertions are available with and without a mask.
Brightness and color values are separately selectable.
Character size can be selected between 16 to 72 lines (DT) or 16 to 139 lines (XT).
Transparent masks and flashing characters can be chosen as well.
TC_link enables data interchange between different modules. A generator module could e.g. be set (triggered) with an external VITC value, which could simultaneously be converted into an ATC by an module. The modules are equipped with the following reader/generator/converter functions:
All data in the SMPTE/EBU metadata dictionary can be inserted as Ancillary Data. Methods for the implementation of these values are included. Various options for specifically designed or custom broadcast encoded transfers, e.g. the “monochrome transfer for MPEG” for transporting ancillary data are available and are supported by an optionally obtainable software.
The universal input/output interfaces of all RUB modules allow for various optional converter features.
Some popular examples are a biphase converter (CTL to Time Code), Sony 9PConverter and „offset-generation“. There are many possible custom applications, so please do not hesitate to contact us for suggested solutions.
DOWNLOADSData SheetManualsDT - moduleXT - moduleFont compilerOptionsSony 9P TC
Product Model ID: RUB XT Module description 3G/HD/HD-SDI video data processor and inserter module RUBIDIUM series 1 & 3 Inserter & Data Processor Module
XT-Options for RUB 1 & 3
XT-B Video bypass relay XT-S Sony 9P abd VDCP converter XT-O Configurable offset (incl. TCU) XT-P Converter biphase/CTL to LTC